i-PRO WJ-NX510K Series Operating Instructions Manual page 44

[Setup via recorder's main monitor]
■ Camera Selection
Select the camera to which the setting of the "Image rotation" is to be sent. Mark the
checkbox of the camera to which the setup information is to be transmitted.
[Transmission] button
Transmit the setting of the "Image rotation" to the camera.
Once transmission is completed and the setting has been applied to the camera, "OK" will
be displayed in the "Results" field.
If the display reads "Authentication error", etc., the camera connection or the setting may
have failed.
[Back] button
Click the button after completing the settings.
The screen returns to the [Camera setup] tab.
Set up pan/tilt-flip [Pan/tilt-flip]
Select the pan/tilt-flip function for each camera and transmit the information to the
cameras to change the camera settings.
Clicking the [Setup >] button for "Pan/tilt-flip" on the [Camera setup] tab will display the
setup page.
40