i-PRO WJ-NX510K Series Operating Instructions Manual page 288

[Operation via recorder's main monitor]
The date & time operation panel will change to playback display. At the same time, the
playback operation panel is displayed at the bottom of the date & time operation panel.
Playback by designating a timeline
☞
Playback operation panel
☞
Step 2
To stop playback and return to live images, click the [Live] button or the stop button on the
playback operation panel.
→ Playback will stop, and live images will be displayed.
Playback by designating a timeline
When playback starts, the date & time operation panel will change to playback display.
This section explains how to use the timeline display to designate a playback date & time
by operating the playback slider.
Note:
● Playback can also be stopped and live images can also be displayed by the
following operations:
・ Clicking the [×] button on the date & time operation panel (playback
display)
・ Changing the playback medium
● When clicking the [Go to last] button while displaying images on a
4-screen, the recorded image may not be displayed depending on the
timing. In this case, click the [Go to last] button again.
● The playback cannot start during the live sequence display in wide view.
Click the [Go to last] button after switching the screen to those other than
the live sequence display.
284