i-PRO WJ-NX510K Series Operating Instructions Manual page 396

Others
[Failover setup]
Select the operational settings.
On (monitoring): Master recorders are monitored to switch recording of the recorder if an
Off (not monitoring): The failover function is not used.
Default: Off (not monitoring)
[Registered information]
Click the [Setup >] button to set the master recorders.
Configure the settings of the monitoring target recorder
☞
[Update] button
Acquires the state of the master recorders and updates the display.
Available: Monitoring is on-going and recording can be switched if an error occurs.
Not available: Monitoring is not available due to the inconsistency with the version or the
Suspend: The failover setup is set to Off.
error occurs.
licenses, or the wrong registered information of the master recorder.
392