i-PRO WJ-NX510K Series Operating Instructions Manual page 117

[Setup via recorder's main monitor]
[SMTP server address]
Enter an IP address or a name of the SMTP server to send e-mails. The name of the SMTP
server is available only when "Manual" is selected for "DNS" on the [Basic] tab accessed
from the "Advanced setup" menu - the "Network" page of the setup menu. Enter up to 255
alphanumeric characters including hyphens (-) and periods (.).
[SMTP port number]
Enter the port number of the SMTP server.
1 - 65535
Default: 25
[POP server address]
Enter an IP address or name of the POP server to be used for POP before SMTP authentication.
The name of the POP server is available only when "Manual" is selected for "DNS" on the
[Basic] tab accessed from the "Advanced setup" menu - the "Network" page of the setup
menu. Enter up to 255 alphanumeric characters including hyphens (-) and periods (.).
[Authentic method]
Select the authentication method to send e-mails from the following.
None/ POP before SMTP/ SMTP
Default: None
[Authentic method - User name]
Enter the user name to be required for the authentication. Enter up to 32 alphanumeric
characters excluding " " ", " & " listed in the description of "Note".
[Authentic method - Password]
Enter the password to be required together with the user name for the authentication.
Enter up to 32 alphanumeric characters excluding " " ", " & " listed in the description of
"Note". An entered character for the password will be displayed as "*".
Note:
● Available characters are as follows.
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z a b c d e f g h i j k l m n
o p q r s t u v w x y z 0 1 2 3 4 5 6 7 8 9 ! # $ % ' ( ) * + ,- . / : ; < = > ? @ [ ¥ ]
^ _ ` { | } ~
113