i-PRO WJ-NX510K Series Operating Instructions Manual page 383

Others
RAID6 Recovery failure [NX410/
NX510]:
Copy media FULL:
Number of data on the copy medium
exceeded:
Network link down detection:
Power failure detection:
Power failure recovery:
Camera SD memory card error:
Camera SD memory write start
command error:
Camera SD memory write completion
command error:
Camera SD Image acquisition failure: CAM ccc GET IMG ERR
Camera SD Accumulated recording
time warning:
Camera SD Overwrite warning:
Camera SD Access error:
Camera SD recording failure:
Camera SD memory card not
recognized:
Camera SD memory card capacity
warning:
Camera SD memory card full:
Camera failure (*):
Exchange notification of wiper rubber
of camera (*):
* For WV-SUD638 camera only
Changed angle:
Recover angle:
The trial period for the ext. software
has expired:
NAS backup error:
NAS backup full:
NAS backup interrupted:
Failover (Operation suspended):
EXTx RAID5 RECOVERY FAILURE
MAIN RAID6 RECOVERY FAILURE
EXTx RAID6 RECOVERY FAILURE
COPY MEDIUM FULL
OVER LIMITATION ON COPY MEDIUM
NETWORK LINK ERROR
POWER LOSS
POWER RECOVERED
CAM ccc SD ERR
CAM ccc SD START ERR
CAM ccc SD END ERR
CAM ccc SD LIFE WARNING (LONG-TERM)
CAM ccc SD LIFE WARNING (OVER-REWRITTEN)
CAM ccc SD ACCESS ERROR
CAM ccc SD RECORDING ERROR
CAM ccc SD MEMORY CARD NOT DETECTED
CAM ccc SD MEMORY CARD CAPACITY WARNING
CAM ccc SD MEMORY CARD FULL
CAM ccc HARDWARE ERROR
CAM ccc REPLACE WIPER RUBBER
CAM ccc CHANGED FROM INSTALLATION ANGLE
CAM ccc RECOVERED TO INSTALLATION ANGLE
CAM ccc EXTENSION SOFTWARE TRIAL PERIOD
EXPIRED
NAS STORAGE-n ERROR
NAS STORAGE-n FULL
NAS STORAGE-n INTERRUPTED
FAILOVEROPERATION SUSPENDED
379