i-PRO WJ-NX510K Series Operating Instructions Manual page 25

[Setup via recorder's main monitor]
Register camera administrator: Registers a user name and password to a camera whose
administrator is not registered. Enter a user name/password.
Change password: Changes the password of the camera user registered to the recorder
only. Enter a password.
■ Camera selection
Select the camera to which the settings are sent.
Mark the checkbox of the camera to which the set user name and password are sent.
(When "Register camera administrator" is selected in the "Settings", you cannot select
cameras whose administrators have already been registered.)
[Transmission] button
Transmit the settings to the camera. Once transmission is completed and the setting has
been applied to the camera, "OK" will be displayed in the
"Results" field. If the display reads "Authentication error", etc., the camera connection or the
setting may have failed.
[Back] button
Click the button after completing the settings. The screen returns to the [Camera
registration] tab.
Note:
● Cameras that already have the User name/Password registered cannot
register another User name/Password.
Note:
● The settings can be made from this recorder only for cameras manufactured
by us or Panasonic.
● For user name and password, enter those of camera administrator rights
according to the specifications of the camera. (Please refer to the
operating instructions of the camera.)
● The entered user name and password are set as registered information of
the applicable camera when the settings to the camera is completed.
● Click [Exit] button when you set the user name and password.
21