i-PRO WJ-NX510K Series Operating Instructions Manual page 115

[Setup via recorder's main monitor]
■ Static route
Click the [Setup >] button to set a static route.
[Static route]
Set a static route. Configure this setting after fully understanding the network environment
of the recorder.
On: Enables the static route.
Off: Disables the static route.
Note:
● The following numbers, the HTTPS port number, the site alarm receive port
number and the port number of the port forwarding are unavailable.20, 21,
23, 25, 42, 53, 67, 68, 69, 79, 105, 110, 123, 161, 162, 443, 546, 547, 995,
10001, 10002, 10003, 10004, 10005, 10006, 10007, 50000~50255
Note:
● If using the static route, select the "Static" for [Network settings].
111