i-PRO WJ-NX510K Series Operating Instructions Manual page 404

Others
Symptom Cause/solution
The live image or ● The PC memory may be insufficient. End the web browser and
the playback image
turns to the black
screen on the web
browser.
"SSL communication ● Follow the procedures below.
unavailable" was ・ Click [Setup >] button of [Security between this product
displayed in the
connection error
information on ・ Confirm that the connection of the camera is set to HTTPS
[Security] –
[Communication]
setting screen after ・ End the setting.
selecting HTTPS for ● If the problem is not solved, further perform the following
the connection with
the camera. ・ Click [Security between recorder and camera] –
・ Click [Setup >] of [Registered information] on [Camera] –
・ Confirm that the camera port number is set to 00080. If the
・ End the setting and open the setting screen again.
・ Click [Setup >] button of [Security between this product
The data size ● The data size displayed in the copy panel is approximate.
displayed in the
copy panel differs
from the data size
which is actually
copied.
unnecessary software, launch the web browser again and
then connect to the recorder.
and camera] – [Connection] item on [Security] –
[Communication] setting screen.
and the port number to 00443. If the port number is
wrong, set it to 00443.
procedures.
[Connection] item button on [Security] – [Communication]
setting screen and set the connection of the camera to
HTTP.
[Camera registration] setting screen.
port number is wrong, set it to 00080.
and camera] – [Connection] item on [Security] –
[Communication] setting screen and reset the connection
of the camera to HTTPS.
Errors will increase if audio data is recorded. Our network
microphones in particular produce a large amount of data, so
more errors tends to occur. Make sure to copy data to media
with enough storage capacity.
400
Reference
−
−
☞ Copy
recorded images