i-PRO WJ-NX510K Series Operating Instructions Manual page 76

[Setup via recorder's main monitor]
☞ Set up recording [Recording setup]
[Back] button
Click the button after completing the settings. The screen returns to the [Recording setup]
tab.
Set up event [Event setup]
Configure event-related settings such as the alarm output duration and buzzer duration.
■ Alarm action
Configure alarm-related items such as alarm output duration and alarm auto reset.
[Output duration]
Select the output duration for the alarm signal output from the terminal on the recorder's
rear panel when an alarm occurs. When "0 s" is selected, alarm signals will not be output.
0 s/ 2 s/ 5 s/ 10 s/ 20 s/ 30 s/ 1 min
Ext.: Alarm output will continue until the alarm action is reset. Refer to the following
section for further information about how to cancel the alarm action.
☞
Cancel the alarm action
72