i-PRO WJ-NX510K Series Operating Instructions Manual page 62

[Setup via recorder's main monitor]
[Schedule mode]
Select the schedule operation.
Off: Do not perform the schedule operation.
Alarm permission (Terminal alarm 1,2,3): Allow the terminal to input an alarm during the
Alarm permission (Terminal alarm 1): Allow Terminal 1 to input an alarm during the set
Alarm permission (Terminal alarm 2): Allow Terminal 2 to input an alarm during the set
Alarm permission (Terminal alarm 3): Allow Terminal 3 to input an alarm during the set
VMD permission: Allow VMD during the set range of the schedule.
Preset position: 1 to Preset position: 8: After the time is set for the schedule, it moves to
[Schedule]
Check the boxes for the day you want to set the schedule range. Set the start time and the
end time when you want to specify a time period. Check "24 h" when the time period is not
set range of the schedule.
range of the schedule.
range of the schedule.
range of the schedule.
the position selected from the preset position
registered in advance.
58