i-PRO WJ-NX510K Series Operating Instructions Manual page 270

[Operation via recorder's main monitor]
Functi Function Description
on
Pan/Tilt Adjusts the horizontal/
vertical position of the
camera image.
Zoom Operates the zoom of the
camera lens to
enlarge/reduce the
camera image.
Move Move the direction of the
to camera to the home
home position registered in
position advance.
Focus Adjusts the focus of the
camera image.
Bright Adjusts the aperture of
ness the lens.
Auto Activates the Auto mode
mode function set in the camera.
Operation
Click the control button on the camera control panel. Also, if you
have checked "Operate camera with mouse", when you click the
position in the camera image that you want to use as the center of
the angle of view, the direction of the camera moves to center on the
clicked position.
Click the [-] or [+] button on the camera control panel. Click the [x1]
button to return the zoom magnification to 1x. Also, if you check
"Operate camera with mouse", you can adjust the zoom by operating
the mouse wheel on the camera screen.
Note
When you select the area you want to display by dragging the
mouse, the direction of the camera moves to the position centered
on the selected area, and the zoom magnification is automatically
adjusted.
Click the [Move] button in the home position of the camera control
panel.
Note
Register the home position in advance.
Click the focus [zoom in] or [zoom out] button on the advanced
camera control panel.
Click the [Auto] button to automatically adjust the focus.
Click the [Dark (-)] or [Bright (+)] button for brightness on the
advanced camera control panel.
Click the [Standard] button to return brightness setting to standard.
Click the [▼] button for the Auto mode in the advanced camera
control panel to select the following Auto modes.
Click the [START] button to start the camera in Auto mode. Click the
[Exit] button to exit the Auto mode.
● Auto-Following/Tracking: The camera automatically tracks objects
moving on the screen.
● Auto Pan: The camera automatically rotates within the range of
the pan start and end positions as set in advance.
● Preset Sequence: Moves through the preset positions registered
266