i-PRO WJ-NX510K Series Operating Instructions Manual page 114

[Setup via recorder's main monitor]
［ Port forwarding ］
Set whether to enable the port forwarding or not.
On: Sets the port forwarding.
Off: Does not set the port forwarding.
Default: On
[Port setup]
Set the port number of each camera between 1 to 65535 if the port forwarding is set.
Default:[NX310] Cam.1: 60001 ~ Cam.32: 60032
[NX410] Cam.1: 60001 ~ Cam.64: 60064
[NX510] Cam.1: 60001 ~ Cam.128: 60128
Important:
● Port forwarding cannot be used with cameras that connection method is
set to HTTPS in "Security between this product and camera".
110