i-PRO WJ-NX510K Series Operating Instructions Manual page 113

[Setup via recorder's main monitor]
[Easy IP Setup accommodate period]
Set time to enable operation of the network settings from the dedicated software to 20
minutes or unlimited from the launch of the recorder.
20 min: Enables operation to change the IP address of the recorder from the dedicated
software for 20 minutes only after the launch of the recorder.
Unlimited: Always enables operation to change the IP address of the recorder from the
dedicated software.
Default: 20 min
■ Port forwarding
Click the [Setup >] button to set the port forwarding.
Note:
● Depending on the network settings, network communication may not be
established if the HTTP port number has been changed. In this case, refer
to the administrator of each network.
● The following numbers, the HTTPS port number, the site alarm receive port
number and the port number of the port forwarding are unavailable.
20, 21, 23, 25, 42, 53, 67, 68, 69, 79, 105, 110, 123, 161, 162, 443, 546, 547,
995, 10001, 10002, 10003, 10004, 10005, 10006, 10007, 50000~50255
109