i-PRO WJ-NX510K Series Operating Instructions Manual page 155

[Setup via recorder's main monitor]
to the following section for further information about the error logs.
Error logs
☞
■ Functions for maintenance
License is added to operate the recorder. In addition, settings and operations are also
performed for maintenance of the recorder.
[Registration of license (This product, camera extension, etc.)]
To use the recorder, it is necessary to obtain the "Registration Key" from the key
management system and to register the license. Clicking the [Setup >] button will open the
registration window to register the license.
Configure the settings and operations relating to the system [System management]
☞
[Registration of license (Security)]
The registration of the secure communication license allows you to use the function to
encrypt the video data.
Click the [Setup >] button to display the license registration screen.
[Save data (to USB medium)]
Saves the setting data on the USB medium. Click the [Execute >] button to display the
confirmation window to start saving.
[Load data (from USB medium)]
Loads the setting data saved on a USB medium (external storage device) into the recorder.
Click the [Execute >] button to display confirmation window to start loading.
[Restoration of the setting values]
Restores past settings stored in the device. Saves settings for the most recent startup and
for the past 3 days. "(ON)" is added to the restoration date and time display at startup.
Important:
● If register the secure communication license, the recorded image cannot
be play recorded on web browser or remote monitoring.
Important:
● Click the [Set] button to save the settings and leave the menu after loading
data.
151