i-PRO WJ-NX510K Series Operating Instructions Manual page 21

[Setup via recorder's main monitor]
[Change the display position of camera]
The camera numbers can be interchanged. When the [Setup >] button is clicked, the
"Change the display position of camera" window opens to edit the
settings.
Interchange camera numbers [Change the display position of camera]
☞
[AI privacy guard recording camera]
The camera used for AI privacy guard recording can be selected.
☞ Select a camera which performs AI privacy guard recording [AI privacy guard recording
camera]
Detect cameras for registration [Detect cameras]
Clicking the [Setup >] button of "Detect cameras" on the [Camera setup] tab will display the
following window.
After editing the settings, click the [OK] button to save the settings and return to the
[Camera registration] tab.
Note:
● When an error message is displayed, check the camera connections and
settings.
(☞ operating instructions of the camera)
If the problem cannot be solved, refer to "Easy Start Guide (included)" and
register the camera again.
● A camera whose part number is "RTSP" or "RTSP(FE)" does not display
error information.
17