i-PRO WJ-NX510K Series Operating Instructions Manual page 63

[Setup via recorder's main monitor]
set.
■ Camera selection
Select the camera to which the setting of the "Schedule" is to be sent. Mark the checkbox of
the camera to which the setup information is to be transmitted.
[Transmission] button
Transmit the setting of the "Schedule" to the camera. Once transmission is completed and
the setting has been applied to the camera, "OK" will be displayed in the "Results" field. If
the display reads "Authentication error", etc., the camera connection or the setting may
have failed.
[Back] button
Click the button after completing the settings. The screen returns to the [Camera setup]
tab.
Set up advanced [Advanced setup]
Set the connection method of the camera.
Clicking the [Setup >] button of "Connection method" under the [Advanced setup] tab
displays the setup screen.
59