i-PRO WJ-NX510K Series Operating Instructions Manual page 168

[Setup via recorder's main monitor]
STEP2
Check the HDDs to add, and click the [Start] button.
The process is completed when "OK" is displayed in the "Results" field and the HDDs are
ready for recording. Click the [Back] button.
About the setup of HDD operation mode
About the HDD operational mode
Single mode: Images and audio from the cameras will be recorded on each HDD in order.
Mirroring mode: The same images and audio from the cameras will be recorded on 2 HDDs
Important:
● When the link process is performed, the data will be erased.
Note:
● [NX310] Two HDDs cannot be linked at the same time in mirroring mode.
Also refer to the following for the link process in mirroring mode.
About the setup of HDD operation mode
☞
164