i-PRO WJ-NX510K Series Operating Instructions Manual page 83

[Setup via recorder's main monitor]
Refer to the following section for further information about the items available for
"Advanced command alarm setup"; "Mode" and "Alarm log", and also "Recording camera",
"Preset" and "Terminal output" under "Setup by command number".
☞ Set up terminal alarm [Advanced terminal alarm setup]
[Back] button
Click the button after completing the settings. The screen returns to the [Event setup] tab.
Configure the advanced settings for recording and events [Advanced
setup]
Configure the special settings related to recording on this tab. Set up the recording mode,
alarm disarm duration and TCP alarm port number (the port number for incoming site
alarm).
79