i-PRO WJ-NX510K Series Operating Instructions Manual page 116

[Setup via recorder's main monitor]
Default: Off
[Address]
Set the destination address. To change the IP address, click the [▲]/[▼] button.
[Subnet mask]
Set the destination subnet mask. Enter in the same way as the address.
[Gateway]
Set the destination gateway. Enter in the same way as the address.
[Back] button
Click this button after completing the settings.
Configure the settings relating to the mail notification [e-Mail]
The settings of alarm mail notice, the settings of warning mail and the settings to use the
mail functions can be configured on this tab.
☞ Alarm mail
112