i-PRO WJ-NX510K Series Operating Instructions Manual page 32

[Setup via recorder's main monitor]
Set up date & time display [Date & time display]
Select the date & time display position for each camera and transmit it to the cameras to
change the camera settings.
Clicking the [Setup >] button for "Date & time display" on the [Camera setup] tab will
display the following items.
■ Setting items
[Display]
Choose whether or not to display the date & time. If date & time display is activated, date
& time will be displayed on camera images and will also be recorded with the recorded
images.
To transmit the settings to the camera, mark this item, and select either of the following.
On: Date & time displayed
Off: Date & time not displayed
Note:
● The display format corresponds to the settings on the [Date & time
settings] tab.
Set up date & time format [Date & time format]
☞
28