i-PRO WJ-NX510K Series Operating Instructions Manual page 48

[Setup via recorder's main monitor]
[Super Dynamic (Wide dynamic range)]
Select "On" or "Off" to determine whether or not to activate the super dynamic function.
On (High): The super dynamic function will work. When "On (High)" is selected, the tone
On: The super dynamic function will work. When "On" is selected, the tone level will be
compensated to emphasize the sensitivity.
Off: The super dynamic function will not work.
■ Camera Selection
Select the camera to which the setting of the "Super Dynamic" is to be sent.
Mark the checkbox of the camera to which the setup information is to be transmitted.
[Transmission] button
Transmit the setting of the "Super Dynamic" to the camera.
Once transmission is completed and the setting has been applied to the camera, "OK" will
be displayed in the "Results" field.
If the display reads "Authentication error", etc., the camera connection or the setting may
have failed.
level will be compensated to emphasize the contrast.
44