i-PRO WJ-NX510K Series Operating Instructions Manual page 395

Others
About license registration
Register the license of the failover function to use it. To register the options, the "Registration
Key" that can be obtained from the Key Management System is required. Refer to the
"Activation Key Card" attached to the recorder for how to obtain the registration key.Enter
the following number for the Activation Key No. and the registration ID.
Activation Key No.: 1574-0060-030C-1234
Registration ID: 264E-7A59
The license is registered in the slave recorder only.
Refer to following section for license registration of the failover function.
Configure the settings and operations relating to the system [System management]
☞
Configure the settings of the failover function
Settings are only made for the slave recorder.Click the [Extra function] - the [Failover] tab of
the [Advanced setup] on the setting menu.
→ The failover screen will be displayed.
Note:
● When the master recorder executes failover operation, the "Recording
mode" setting will be turned to OFF. Set it to On to return to normal
operation.
391
]