i-PRO WJ-NX510K Series Operating Instructions Manual page 291

[Operation via recorder's main monitor]
[Advanced setup] button
Display the advanced setup panel and change event types and other information displayed
on the timeline.
Playback will be paused.
[Scale selection] button ( ① )
Select a timeline display covering 2 hours (2 h), 8 hours (8 h) or 24 hours (24 h).
[Display range selection] button ( ② )
The timeline will be displayed in accordance with the setting of the scale selection button.
[Playback slider] ( ⑥ )
Displays the time during playback. Drag and drop the playback slider to a desired time on
the timeline to start playback from that time.
[Jump interval] ( ⑤ ) /[Jump] ( ④ ) buttons
Move the playback point by a given amount of time and play back from that point. Clicking
the [<] / [>] buttons will move the playback point by the amount of time specified under
[Jump interval].
Available ranges: 10 s/ 15 s/ 30 s/ 60 s/ 180 s/ 300 s
[Playback of audio]
This item is displayed when the recorder is set up to lock in a camera with audio output. If
this checkbox is marked, the audio associated with the displayed image will be output.
Configure other settings relating to monitors [Advanced setup]
☞
Note:
● The playback slider may not soon move to the desired position.
287