i-PRO WJ-NX510K Series Operating Instructions Manual page 40

[Setup via recorder's main monitor]
[Transmission] button
Transmit the setting of the "Transmission priority" to the camera.
Once transmission is completed and the setting has been applied to the camera, "OK" will
be displayed in the "Results" field.
If the display reads "Authentication error", etc., the camera connection or the setting may
have failed.
[Back] button
Click the button after completing the settings.
The screen returns to the [Camera setup] tab.
Set up the refresh interval [Refresh interval]
Select the image refresh interval for each camera and transmit it to the cameras to change
the camera settings.
Clicking the [Setup >] button for "Refresh interval" on the [Camera setup] tab will display
the setup page.
[Refresh interval]
Select an interval to update the image display. If used in a network environment where
36