i-PRO WJ-NX510K Series Operating Instructions Manual page 277

[Operation via recorder's main monitor]
● The alarm indicator on the front panel will stop blinking and light steadily.
● The alarm status display on the main monitor will disappear.
● The sounding buzzer and the alarm output will stop.
Step 1
Click the [Alarm] button displayed on the main monitor, and click the alarm [Reset] button.
→ The alarm action will be canceled and the alarm indicator will go off.
Cancel the error action
When an error (trouble) occurred on the recorder, the recorder will take the error action (a
series of actions that notifies of the error occurrence). Information of the occurred error will
be displayed on the status display panel of the main monitor. To cancel an error action,
first click the [Error] button on the status display panel and then the displayed error [Reset]
button.
Set up the main monitor [Main monitor]
☞
Note:
● When the alarm action is canceled, the event recording will stop and return
to the operational status just before the event occurred.
Note:
● When an error occurs, take remedial action by following the instructions
displayed on the error log panel. The error indicator on the front of the
recorder will go off when the cause of the error has been eliminated.
☞ Play images selected from logs (Log search)
● When the cause of the error is resolved automatically, the following
operations are performed automatically.
・ The error indicator on the front panel will stop blinking and light steadily.
・ The error status display on the main monitor will disappear.
・ The sounding buzzer and error output will stop.
● Clicking the error reset button turns off the error button and error indicator.
273