i-PRO WJ-NX510K Series Operating Instructions Manual page 79

[Setup via recorder's main monitor]
using AI privacy guard recording, select whether to display the camera (Recording camera)
without privacy guard or the camera (AI privacy guard recording camera) with privacy
guard.
Default: Recording camera
■ Advanced event setup
Configure advanced settings for individual alarm types (terminal alarm, camera site alarm,
and command alarm). Clicking the [Advanced >] button for each item will open the
respective "Advanced setup".
Set up terminal alarm [Advanced terminal alarm setup]
Configure the settings relating to the recording triggered by an alarm signal supplied to the
ALARM/CONTROL connector of the recorder from an external alarm device such as a door
sensor.
Configure the necessary settings for each alarm input terminal of the ALARM/CONTROL
connector on the rear panel of the recorder.
[NX310]
■ Advanced terminal alarm setup
[Mode]
Select the action to be taken when an alarm signal is supplied.
Recording & alarm action: Performs all event actions according to the settings.
Recording only: Only recording, filing of event logs, and moving the camera to a preset
Off: Only filing of event logs will be performed.
position will be performed.
75
[NX410/NX510]