i-PRO WJ-NX510K Series Operating Instructions Manual page 145

[Setup via recorder's main monitor]
[Camera recording group check]
The check screen of the Camera recording group is displayed. Click [View >] button to
display the following screen.
About the setup of HDD operation mode
☞
[HDD remaining capacity]
Displays remaining capacity of HDD. Also, the timing to notice when the capacity becomes
low can be set.
Click [View] button to display HDD remaining capacity.
Note:
● While overwriting recording is being performed, the overwriting cycle will
be calculated based on the date & time of the oldest recorded data and
that of the newest recorded data.
● The more often the recording was performed in the past, the more
accurate the calculation of overwriting cycle will be.
● When the recording conditions are changed or when data is automatically
deleted, the overwriting cycle will not be indicated accurately.
● Overwrite cycle will not be displayed when setting the recording group.
141