i-PRO WJ-NX510K Series Operating Instructions Manual page 75

Hide thumbs Also See for WJ-NX510K Series:
Table of Contents

Advertisement

[Setup via recorder's main monitor]
Set up recording [Recording setup]
[Audio]
Select whether or not to record audio together with images.
On(AAC-LC): Audio will be recorded.
Off: Audio will not be recorded.
Default: Off
[Schedule]
Select a schedule in which the desired recording to be performed is included.
Schedule1: Recording will be performed according to the settings for schedule1.
Schedule16: Recording will be performed according to the settings for schedule16.
Default: Schedule1
[Event]
Select the frame rate of the event recording.
1 ips/ 3 ips/ 5 ips/ 10 ips/ 12.5 ips/ 15 ips/ 25 ips/ 30 ips/ (Same as the basic)
Default: Same as the basic
[Emergency]
Set the frame rate of the emergency recording.
1 ips/ 3 ips/ 5 ips/ 10 ips/ 12.5 ips/ 15 ips/ 25 ips/ 30 ips/ (Same as the basic)
Default: Same as the basic
[Referenced recording days]
Refer to the following section.
Note:
● If the rate of the basic settings is 50 ips or 60 ips, the settings of the event
recording and the emergency recording will be the same as the rate or the
basic setting and displayed as "Same as the basic". In this case, the settings
of the event recording and emergency recording cannot be changed.
● The rates of recorded images set to 5 ips/ 10 ips/ 15 ips become 4.2 ips/
8.3 ips/ 12.5 ips respectively if any of the basic setup, the event recording
or the emergency recording of the same camera is set to 12.5 ips or 25 ips.
● If the SD backup rec. or the SD recording function of the camera is used,
set the frame rate of the event recording and the emergency recording to
"Same as the basic".
71

Advertisement

Table of Contents
loading

Table of Contents