i-PRO WJ-NX510K Series Operating Instructions Manual page 147

[Setup via recorder's main monitor]
■ HDD Maintenance
Set a password for the HDD viewer, format and remove HDDs. Click the [Setup >] button
for HDD maintenance.
[Set password for HDD viewer]
Set whether you will assign a password to the HDD mounted on the recorder. Setting it to
"On" allows you to set a password to the HDD when removing HDD. When you use a HDD
with a password set in HDD viewer, you need to enter the password.
On：Sets a password for the HDD.
Off：Does not set a password for the HDD.。
Default: Off
Important:
● Removing the HDD without the following removal process of the HDD,
the password is not set in the HDD.
Confirm the hard disk drive information [HDD information]
☞
About the removal process and the link process of hard disk drives
☞
143