i-PRO WJ-NX510K Series Operating Instructions Manual page 146

[Setup via recorder's main monitor]
* Example above shows the screen for single mode.
[Capacity]
Displays the capacity of HDD.
[Remaining capacity]
Displays remaining capacity of HDD.
[HDD Remaining capacity notice]
Set the notification timing for when the remaining capacity of HDD becomes low compared
to the total capacity. There are E-mail notification and original notification.
Off: Does not perform HDD remaining capacity notice.
1%~10%: Notifies when remaining capacity becomes below the set value.
Default: Off
Note:
● Remaining capacity displayed does not include capacity used to manage
data. Therefore, the displayed HDD capacity is less than the actual amount.
● Remaining capacity will displayed as 0GB if the whole space of the HDD is
used up by recording data.
142