i-PRO WJ-NX510K Series Operating Instructions Manual page 69

[Setup via recorder's main monitor]
[Referenced recording days]
Calculates and displays the total number of days for which recording on the hard disk
drives is available.
[Advanced >] button
The "Advanced recording setup" will be displayed. Each camera can be set up separately for
recording.
Important:
● For a camera whose compression method is [MJPEG], "XF" cannot be set.
● If a camera whose compression method is [MJPEG] is included, [MJPEG]
camera is set to "SF" even if "XF" is set by slider bar of image quality
setting. You can confirm the current setting value with [Advanced setup >]
in Recording setup (All cameras).
Note:
● The referenced recording days will be displayed correctly only when the
settings have been saved while the recorder has recognized the camera
correctly.
● The referenced recording days will be calculated based on the assumption
that recording is started on Monday. The special day settings are not taken
into account.
● This value excludes the HDD consumption for the event/emergency
recording.
● If a camera manufactured by other than ours is used, the value of
"Referenced recording days" will not be displayed.
● "*" preceding an item indicates that the item has been changed on the
"Advanced recording setup" page.
● When configured to perform recording in high resolution and high quality,
recording may sometimes not be performed at the specified rate. When
there may be possibility to fail recording at the specified rate while using
only our cameras, the confirmation window will be displayed.
● When the "Auto data delete" is set to other than "Off", the set number of
days will be recorded at the same time.
Configure the settings and operations relating to the system [System
☞
management]
65