i-PRO WJ-NX510K Series Operating Instructions Manual page 406

Others
Symptom Cause/solution
are not displayed
on the monitor as
split screens, but
are displayed as
black images.
No image is ● Does the HDMI output signal format match the specifications
displayed on the
HDMI monitor.
● Is an HDMI switcher used between this product and the
● Is the cable in use compliant with the HDMI specifications? It
target cameras in AI privacy guard settings, the H.264 (2) and
H.265 camera resolutions become the same as those of H.264
(1) and H.265 (1). Accordingly, depending on the number of
split screens, live images may not be displayed or playback
may not be available. If you are not using AI privacy guard
recording with this product, set "Target stream" in the AI
privacy guard settings for the target cameras to something
other than "Stream (2) & Stream (4)".
of your monitor?
To fix the HDMI output signal format, set the signal format
supported by the monitor.
monitor? It may not work properly depending on the
specifications of the HDMI switcher. In addition, please use an
HDMI switcher that supports buspowered drive in a state
where it operates with an external power supply for stable
operation.
may not work with a cable not compliant with the HDMI
specifications. In addition, please use an HDMI cable of 5m or
less in length to prevent deterioration of image quality and
for stable operation.
402
Reference
registered
information
[Registered
information]
Select a
☞
camera which
performs AI
privacy guard
recording [AI
privacy guard
recording
camera]
☞ Display
images from
cameras on a
multiscreen
Play
☞
recorded images
Set up the
☞
main monitor
[Main monitor]
Installation Guide
" "