i-PRO WJ-NX510K Series Operating Instructions Manual page 182

[Setup via recorder's main monitor]
Configure the advanced settings [Advanced setup]
Set whether to operate the server installed in this recorder.
[NTP Server]
Set whether to operate the NTP server.
On: Operate the NTP server
Off: Do not operate the NTP server
Default: On
[HTTP/HTTPS Server]
Set whether to operate the HTTP/HTTPS server.
On: Operate the HTTP/HTTPS server
Off: Do not operate the HTTP/HTTPS server
Default: On
Important:
● If turn the setting off, the recorder will not be able to connect from a web
browser or other peripheral software.
178