i-PRO WJ-NX510K Series Operating Instructions Manual page 335

[Operation via PC web browser]
Displays the copy window. Use this button to copy the recorded images to an external
storage device.
List display area
Total: Displays the total number of listed data.
No.: The number will be displayed in the order of occurrence.
Date & List: Date & time when an event or trouble occurred will be displayed.
Log: Details of the occurred event are displayed.
The following are the maximum number of logs that can be saved. When the number
of logs exceeds the limit, the older logs will be overwritten by the newer logs. In this
case, the oldest log is the first to be overwritten.
Alarm log: Up to 1000
Error log: Up to 1000
Clicking date & time in the list can start playback from that date & time. (When clicking
date & time in the log information, playback will be started from a point approx. 5 seconds
before the date & time selected.)
To display search results or a list of copied data, refer to the following sections, respectively.
☞ Search and play recording events (REC event search)
Check a list of copied recorded images
☞
Camera selection panel
Clicking the [Cam. select] tab will display the operation panel shown below. Switch the
image display area and select camera images.
Note:
● To start playback from the beginning of the preevent recording when the
"Pre-event duration" setting is longer than 5 seconds, click the playback
button, and then click the previous record button.
● The corresponding recorded data that is displayed in the selected log list
cannot be played if the data has already been overwritten or erased.
331