i-PRO WJ-NX510K Series Operating Instructions Manual page 148

[Setup via recorder's main monitor]
[Password]
Assign a password for HDD viewer using the on-screen keyboard. The password must be
between 8-32 characters including the half-width alphanumeric and the symbol (excluding
" " " and " & "). Use at least three types of characters among alphabet (uppercase), alphabet
(lowercase), numbers and symbols. The set password will be displayed as "*****" regardless
of what is entered.
[Password (Retype)]
Enter the password that has been set for "Password" again for confirmation.
[Registration] button
Register the password that you have set.
[Save HDD viewer (to USB medium)]
Save HDD viewer to a USB medium (external storage device). Click the [Execute >] button
to display the confirmation window to start saving. HDD viewer is saved under the USB
medium drive as a compressed file (NX_HDD_Viewer.zip). Unzip the file to use it. The
operating instructions of HDD viewer are available on our following website.
https://i-pro.com/global/en/surveillance/documentation_database
[Format HDD]
Select a HDD to format and click the [Start] button to format the HDD.
[Remove HDD]
Select a HDD to remove and click the [Start] button to display the password confirmation
window for the HDD viewer. When the entered value and the setting match, the HDD is
removed.
Important:
● If you forget the password of the removed HDD, you cannot play back the
HDD in HDD viewer.
Important:
● When a hard disk drive is formatted, all the recorded images will be erased.
● HDDs with "Playback only" or "Added" status only can be selected.
● After starting to format the HDD, copying, downloading and backing up to
NAS in process will stop.
144