i-PRO WJ-NX510K Series Operating Instructions Manual page 127

[Setup via recorder's main monitor]
2. Register the product to the remote monitoring.
Before carrying out registration, check the following:
● Check that the product is connected to the Internet from [Internet connection status].
When "Not connected" is displayed, connect the product to the Internet.
● Check that the product is connected to the remote monitoring from [Remote
monitoring connection status]. If [Remote monitoring connection status] displays "Not
connected" even though you are connected to the Internet, check that the SSL
connection (port number: 443) is permitted.
● If you do not have a remote monitoring account, scan the QR code displayed on the
screen with a smartphone/tablet to access the account registration URL and follow the
guide to obtain an account.
When you click the [Register] button of [Register for remote monitoring], the following
[Remote monitoring login] screen is displayed.
Enter the email address and password used when creating the remote monitoring account
and click the [OK] button, and a confirmation screen will appear.
123