i-PRO WJ-NX510K Series Operating Instructions Manual page 36

[Setup via recorder's main monitor]
Once transmission is completed and the setting has been applied to the camera, "OK" will
be displayed in the "Results" field.
If the display reads "Authentication error", etc., the camera connection or the setting may
have failed.
[Back] button
Click the button after completing the settings.
The screen returns to the [Camera setup] tab.
Set up how to turn on or off the indicators [Indicator]
Select how to turn on or off the link indicator, access indicator or status indicators for each
camera and transmit the information to the cameras to change the camera settings. Refer
to the operating instructions of the camera for further information.
Clicking the [Setup >] button for "Indicator" on the [Camera setup] tab will display the
setup page.
[Indicator]
On: All the indicators will light in accordance with the status.
On (Access): Only the live indicator will light when images are viewed.
32