i-PRO WJ-NX510K Series Operating Instructions Manual page 24

[Setup via recorder's main monitor]
Change the password of camera [Management of camera user]
Click the [Setup >] button of "Management of camera user" on the [Camera registration]
tab to display the following screen.
[Settings]
Select items to set up.
recorder will forcibly change the setting to "Off" to give the IP addresses
automatically.
● If this product does not automatically assign an IP address to the camera,
set a fixed IP address to the camera that can communicate with this product.
● If the IP address of the camera is set to be assigned automatically, an IP
address will be assigned to the camera when the [OK] button is clicked. In
this case, the default gateway of the recorder is set to the default gateway
of the camera.
Configure the basic network settings [Basic]
☞
● Click the [Cancel] button to return to the [Camera registration] tab without
applying the camera detection result.
20