i-PRO WJ-NX510K Series Operating Instructions Manual page 279

Hide thumbs Also See for WJ-NX510K Series:
Table of Contents

Advertisement

[Operation via recorder's main monitor]
Recording mode and its priority
There are 4 recording modes. The recording modes and their priority levels are as follows.
When two or more recordings with different recording modes started simultaneously, only
recording with the higher priority will start.
Recording mode
Emergency recording
Event recording
Schedule recording
Pre-event recording
Audio
The audio recording is done at the same time as the image recording. The audio recording
can be set for each camera. Refer to the following section for further information.
Set up recording for individual cameras [Advanced recording setup]
Emergency recording
The recording is manually done using a switch connected to the "Emergency recording
input" terminal of the "ALARM/CONTROL connector" on the back side of the recorder
when the emergency occurs. For example, you can install a switch into the reception of the
store and press the switch for the emergency recording when a suspicious person appears.
Step 1
Press the switch connected to the "Emergency recording input" terminal.
→ The emergency recording will start.
on the hour. In that moment, recording may sometimes be interrupted
around for 1 second.
Priority
1
2
3
4
Note:
● The audio recording is done at the same time as the image recording.
Recording of the audio only is not available.
Important:
● The emergency recording records all images of all the connected cameras.
275

Advertisement

Table of Contents
loading

Table of Contents