6.
Select any font in the right-hand window. The Add All
selection changes to Remove All. Then, select Remove All to
remove all the fonts.
7.
Wait until the removing process finishes.
8.
Choose Quit from the File menu.
Before You Print
After the controller is setup, you need to do the following general
preparations and initial printing setup before you start the first
regular print job.
General Pre-Printing Procedures
The pre-printing procedures prepare different parts of your system
for the initial setup.
1.
Make sure ink is loaded in the color printer. See the printer
documentation for details.
2.
Prime the printer to make sure all print heads are firing. See
the printer documentation for details.
3.
Calibrate the print heads. See the printer documentation for
details.
4.
Calibrate your Colortron. See the Colortron documentation.
5.
Calibrate the Monitor. See "Monitor Calibration" in chapter 8.
_____________________________________
Macintosh Setup 3-17