4.
Locate the Colortron Calibration Target that came with your
Colortron. This target (printed on special yellow and fade
resistance paper) contains a factory measured absolute white
spot (fig. 8.13).
Fig. 8.13 The Colortron Calibration Target
5.
Measure the target's "WHITE" patch (not the "PAPER"
patch) by holding the aperture over the patch until the
computer beeps and Colortron's red indicator light turns to
green. Click Done to return to the Colortron Control window
(for more details, see your Colortron manual).
Measure the Calibration Strip with the Colortron II
ColorShop's Dot Area tool computes the apparent dot area for tint
patches on paper or film. Dot area is the percentage of a particular
tint relative to the solid tint. The most common use for the Dot Area
tool is for measuring CMYK test strips.
To compute the dot area for the calibration strip
8-20 Color
Managementbb
White
Paper
__________________________________