Ethertalk Driver; Ethernet Configuration For Novell Netware - Xante Accel-a-Graphix CT4 User Manual

6. Click Accel-a-Graphix CT4 controller on LPT1... to select it.
7. Click Connect... (fig. 6.27). A window displays showing the
available interfaces.
8. Select the interface to which your printer is connected.
9. Click OK.
10. Close all open windows.
11. Resume the printing process in your application.

EtherTalk Driver

Your Accel-a-Graphix CT4 supports EtherTalk Phase 2. You need a
Phase 2 driver installed on your Macintosh to use your Ethernet
option. This driver should be supplied by the manufacturers of the
EtherTalk controller for your Macintosh.
You select the Phase 2 driver by clicking the Network Icon in the
Macintosh Control Panel Desk accessory, and then clicking the
Phase 2 driver's icon. The Phase 2 icon has two double arrows.
Ethernet Configuration for Novell
NetWare
Use the Novell Print Server menu, IF:NVL PSRV, to configure the
Ethernet interface for Novell NetWare in an Ethernet environment.
This menu has two submenus, the Enable menu and the Protocol
menu. The former allows you to enable (YES) or to disable (NO) the
Ethernet interface on your controller. The Novell Protocol menu
allows you to select IEEE protocol frame types. See "Selecting Menu
Options" and "The Novell Print Server Menu" sections of chapter 5
for details.
6-28 Routine Operationsbb __________________________________