Table of Contents
Advertisement
Enable Poster
The Enable Poster options can be set only through the PPD. This
menu allows you to print up to 50' x 50' posters by having the
controller tile the image to the printer(s). Tiling divides the image
into printable sections which then can be assembled into one large
image. Options are Printer's default, Disable Poster, and Enable
Poster. The factory default is Printer's default.
Note: Disable this option unless you are tiling a job. This prevents
excess small strips from printing after the main image.
Fig. 6.16 The Enable Poster Options
Page Overlap
The Page Overlap options can be set only through the PPD. This
menu allows you to control the amount of overlap area printed when
creating tiles for a large poster image. The options are Printer's
default, None, 0.5 inch, 1.0 inch, and 1.5 inch.
Fig. 6.17 The Page Overlap Options
6-18 Routine
Operationsbb
__________________________________
Advertisement
Table of Contents
Troubleshooting
