Introduction
This chapter covers describes how to use the controller's PPD, work
with Macintosh and Windows applications, configure and use Novell
Netware and TCP/IP software. It also explains how to use a SCSI
disk, move and clean the controller.
Using the Controller's PPD
To load the PostScript Printer driver and Accel-a-Graphix CT4 PPD,
see chapter 3, " Macintosh Setup" or chapter 4, " PC Setup."
Controller feature options can be set through the PPD, the front
panel, and XANTÉ Utilities. If a single option can be set through
more than one of these devices, the PPD settings usually have
priority, followed by utility settings, and then the front panel
settings.
The PPD allows you to specify print options for the application and
the controller through the print dialog box. Although application
print dialog boxes vary, controller specific options are usually
accessed through the Device Options tab on a PC and through the
Print Options menu on a Macintosh.
General PPD Option Menu Features
The general PPD features are Cover Page, Print, and PostScript
Errors.
Cover Page
The Cover Page options allow you to choose whether to print a cover
page for a job, and if so, whether to print it at the beginning of end of
the job.
___________________________________
Routine Operations 6-3