Table of Contents
Advertisement
4.
Select I/O Interfaces to Spool... from the Configure menu. The
Select I/O Interfaces to Spool window appears (fig. 6.35).
Fig. 6.35 The Select I/O Interfaces to Spool Window
5.
Select the interface you wish to use for spooling. Then, click
OK. You return to the Spooler window.
6.
Click Close. You return to XANTÉ Command Center's main
window.
7.
Select Quit from the File menu to exit Command Center.
Using a SCSI Disk
The XANTÉ controller has six available bays to add extra internal
hard disks. For example, you may want to add disks to gain the space
needed to print large, poster size images or to store fonts.
For information on initializing a hard disk, see "Initializing the Hard
Disk" in chapter 2.
To download fonts to the internal hard disk, see "Downloading to
Printer Memory or a Hard Disk" in chapter 3 for a Macintosh
environment or "Loading Printer Fonts " in chapter 4 for a PC
environment. To remove downloaded fonts from the disk, see the
next section, "Removing Downloaded Fonts."
6-52 Routine
Operationsbb
__________________________________
Advertisement
Table of Contents
Troubleshooting
