Introduction
This chapter covers setting up your new Accel-a-Graphix CT4. It
includes finding the right location, unpacking the controller,
connecting the power cord, and connecting to an interface and a
printer.
Controller Location
Before unpacking your controller, choose a location for set up that
meets the following guidelines:
•
A level, sturdy surface capable of supporting the
controller's weight
•
Sufficient clearance for operation and maintenance
•
A temperature of 50˚ to 90.5˚ Fahrenheit (10˚ to 32.5˚
Celsius) without rapid changes
•
A relative humidity between 20% and 80%
•
An area away from direct sunlight, open flames,
refrigerators, water faucets, humidifiers, heaters, or similar
equipment
•
An area away from strong vibrations or electromagnetic
fields
•
Proper computer-controller distance for communication:
within 10 feet (3 m) for parallel; within 25 feet (7.5 m) for
serial; within 1000 feet (305 m) for LocalTalk
•
An area close to a grounded electrical outlet with the
proper voltage
__________________________________________
Installation 2-3