3.
Type the following initialization file.
serverdict begin 0 exitserver
statusdict begin
(%disk0%) 0 1 devformat
end
4.
Select Save from the File menu, and save this file as Initialize
Disk.ps on your computer system.
5.
Select Quit from the File menu to exit TeachText.
6.
Insert the Macintosh XANTÉ Utilities disk included with your
controller.
7.
Open the Utilities folder.
8.
Double-click the Downloader icon to open that utility.
9.
Choose Download PostScript File from the File menu.
10.
Locate the Initialize Disk.ps file which you created in step 3.
11.
Select the Initialize Disk.ps file and click Download.
Initializing takes time, so be patient. The following status
message appears when the initializing is complete:
The download was successful.
12.
Click OK. Then, select Quit from the File menu.
Initializing the Hard Disk with the PC
You can initialize the internal hard disk in a PC environment by
creating the following PostScript file and then downloading this file
to the controller's hard disk.
__________________________________________ Installation 2-31