Save Spooled Job - Xante Accel-a-Graphix CT4 User Manual

Fig. 6.14 The Best Fit Options

Save Spooled Job

The Save Spooled Job options can be set only through the PPD. This
menu allows you to save processed files to the controller's hard
drive. Spooling must be enabled from the front panel or the
Command Center to use this feature. Options are Printer's default,
True, and False. The factory default is Printer's default. See " The
Interface Menu" in chapter 5 and "Using the Spooler" later in this
chapter for details.
Fig. 6.15 The Save Spooled Job Options
___________________________________ Routine Operations 6-17