Before you begin this setup, take a few minutes to familiarize
yourself with the controller. The following illustration provides an
overview of the front and back of your controller.
Power
Receptacle
Output Ports
(Accel-a-Graphix
CT4 to printer)
LocalTalk
Fig. 2.1 Front and Rear Views of the Controller
Unpacking the Controller
Various packing materials protect your controller during shipping.
You may want to save the packing materials in case you have to
move or ship the controller later. If you decide to upgrade your
controller model to handle more printers, the controller must be
returned to XANTÉ for factory upgrading.
__________________________________________
Front Panel
Ethernet
Parallel
Input Ports
(Host Computer to
Serial
Accel-a-Graphix CT4)
Power Switch
Installation 2-5