Printer Enable - Xante Accel-a-Graphix CT4 User Manual

Printer Enable

The Printer Enable menu allows you to enable the printer(s) whose
number(s) appear in the menu.
Options are Printer's default, None, Printer 1 only, Printer 2 only,
Printer 3 only, Printer 4 only, Printer 1&2, Printer 1&3, Printer 1&4,
Printer 2&3, Printer 2&4, Printer 3&4, Printer 1,2,&3, Printer
1,2,&4, Printer 2,3,&4, and Printer All. None allows the controller to
use whatever printer(s) the job specifies and will not change the
printer(s) setting(s). The factory default is Printer's default.
Fig. 6.19 The Printer Enable Options
6-20 Routine Operationsbb __________________________________